CIH Equipment Company, Inc.
Phone: (813) 891-6830Toll Free: (888) 873-2443
Email:info@cihequipment.com
Phone: (813) 891-6830
Toll Free:
(888) 873-2443
ISC M-40 OX/LEL/H2S/CO
The M40 comes standard with a continuous loop data logger. The data logger has enough memory to store 50 hours of data for all four sensors we well as temperature. When 50 hours is exceeded, the data logger will go back and start overwriting the oldest data in memory. Data is logged in one minute intervals and can be downloaded to a PC via the software package and Datalink Module.
Jerome Mercury Vapor Monitors
The Jerome Gold Film Mercury Vapor Analyzer is designed for the easy and accurate analysis of mercury vapor in the workplace environment and for the location of mercury spills. This portable instrument operates five hours on fully charged batteries. The microprocessor automatically re-zeros the digital meter at the start of each sample cycle and freezes the meter reading until the next sample cycle is activated, thus eliminating drift between samples. Range: 0.000 to 1.999 mg/m3 Hg.
Sensidyne Colorimetric Hand Pump
For use with Sensidyne Colorimetric tubes, this piston pump gives reliable, reproducible and accurate measurements. The pump draws a 100 ml sample; one half strake draws 50 ml.
MSA Kwik-Draw
RAE MiniRAE PID
Programmable Professional Photo Ionization Detector. Measures organic vapors in hazardous or industrial environments.
Foxboro OVA 128
Direct readings of volatile organic compounds (VOC's) in survey applications. Model 128 is designed to detect organic chemicals in hazardous waste site assessment surveys, industrial hygiene monitoring, leak source detection, and confined-area monitoring. It measures in 3 selectable ranges of 0 to 10 ppm, 0 to 100 ppm and 1 to 1,000 ppm.
Heath Porta FID-II
This instrument measures very small quantities (ppm) of combustible substances utilizing a flame ionization detector. This lightweight, rugged unit has a separate fuel supply and its sampling system is capable of up to 10 hours of operation on two fuel cylinders. There is a continuous alarm for flame-out. The Porta-FID II is a flame-ionization detector for total hydrocarbons.
Please call us for anything you do not see listed!!!
The M40 comes standard with a continuous loop data logger. The data logger has enough memory to store 50 hours of data for all four sensors we well as temperature. When 50 hours is exceeded, the data logger will go back and start overwriting the oldest data in memory. Data is logged in one minute intervals and can be downloaded to a PC via the software package and Datalink Module.
Jerome Mercury Vapor Monitors
The Jerome Gold Film Mercury Vapor Analyzer is designed for the easy and accurate analysis of mercury vapor in the workplace environment and for the location of mercury spills. This portable instrument operates five hours on fully charged batteries. The microprocessor automatically re-zeros the digital meter at the start of each sample cycle and freezes the meter reading until the next sample cycle is activated, thus eliminating drift between samples. Range: 0.000 to 1.999 mg/m3 Hg.
Sensidyne Colorimetric Hand Pump
For use with Sensidyne Colorimetric tubes, this piston pump gives reliable, reproducible and accurate measurements. The pump draws a 100 ml sample; one half strake draws 50 ml.
MSA Kwik-Draw
RAE MiniRAE PID
Programmable Professional Photo Ionization Detector. Measures organic vapors in hazardous or industrial environments.
Foxboro OVA 128
Direct readings of volatile organic compounds (VOC's) in survey applications. Model 128 is designed to detect organic chemicals in hazardous waste site assessment surveys, industrial hygiene monitoring, leak source detection, and confined-area monitoring. It measures in 3 selectable ranges of 0 to 10 ppm, 0 to 100 ppm and 1 to 1,000 ppm.
Heath Porta FID-II
This instrument measures very small quantities (ppm) of combustible substances utilizing a flame ionization detector. This lightweight, rugged unit has a separate fuel supply and its sampling system is capable of up to 10 hours of operation on two fuel cylinders. There is a continuous alarm for flame-out. The Porta-FID II is a flame-ionization detector for total hydrocarbons.
Please call us for anything you do not see listed!!!