Air Samplers

Small and lightweight, Pocket Pump easily fits into a shirt pocket.

Measuring 4.5 x 2.2 x 1.4 in (11.4 x 5.6 x 3.6 cm) and weighing only 5 oz (142 g), the Pocket Pump's impact-resistant case endures rough handling and protects against EMI and RFI interference. The sliding cover protects the keypad and interface port from moisture and impact damage.

Flow Ranges: 20 to 225 mL/min
Flow adjusted: Push button
Weight: 5 ounces
Back Pressure: 20" at 200 mL/min
Battery Type: NiMH battery
Operating Temp: 20 to 110°F (-7 to 43°C)
Listings: UL and cUL
*AR

Patented electronic laminar flow control.
Internal secondary standard calibrates the pump continuously, maintaining OSHA compliance.
Check against a primary standard only once a month or every 200 hours for coal mine dust sampling.
Inlet filter traps moisture and particular matter.
Stainless steel-filled plastic case provides EMI/RFI protection.
Rated IP66 for resistance to water and dust ingress.
Exceptionally quiet operation.
Flow-Fault Indicator shows any sample inlet blockage.
Run/Hold feature allows “time out” during sampling process.
Elapsed time readout and low-battery warning.
Low flow and dual tube sampling available with Gemini Twin-Port Sampler.
Approvals

NIOSH certified for coal mine dust sampling (TC-74-030)
MSHA certified as intrinsically safe for underground use (Approval # 2G-3924-1).
UL approved as intrinsically safe for use in hazardous locations, Class I, Groups A, B, C, D; Class II, Groups E, F and G; Class III, Division I locations.

The Sensidyne Gilian GilAir-5 Constant Flow Sampling Pump provides industrial hygienists and safety managers with a dynamic air sampling system operating at a flow rate of 1-5000 cc/min. This comprehensive 3-in-1 sampler performs filter cassette, single and multiple sorbent tube sampling with constant flow accuracy, while offering convenient programmable timing options.

Features:

Constant flow: 750-5000 cc/min
Low flow: 1-750 cc/min
Rechargeable battery pack system
Built-in rotameter & flow adjust
Multiple sorbent tube capability
Programmable LCD clock timer
Instant-fault function
Compact, lightweight, & quiet
UL listed intrinsically safe
MSHA, CE & SIRA approved
*AR

The BIOS DryCal DC-Lite provides users with a primary flow standard for industrial hygiene, environmental and laboratory applications. The DryCal DC-Lite fits easily into a slim briefcase for convenient transport and in keeping with all BIOS DryCal flow meters; it eliminates the need for messy soap film solutions.

Highlights:

• Primary Flow Standard
• Certified NIST Traceable
• 5-Minute Auto Shut-Off
• Simple Push-Button Operation
• Immune to Flow Source Pulsation
• Fast & Accurate

The Gilian AIRCON 520 Air Collection System maintains a constant flow air source from 2 to 20 LPM making it ideal for area clearance sampling and other very low concentration particulate/pollutant sampling. Pressure Range to 168 H2O. Flow Control less than 5% deviation. Weight 23 lbs. Size 6 3/8W x 10D x 16 1/4H. Built-in rotometer and load pressure gauge. US.

The Sensidyne Gilian LFS-113 Air Sampling System is a comprehensive function, dual-mode air sampler offering constant low flows of 5-200 cc/min and multi-tube flow rates of 1 to 350 cc/min.

Features:

Elapsed time clock

Built-in sorbent tube end breaker

Multi-tube sorbent tube sampling capability

Suction and discharge sampling

Instant-fault functions

Battery check LEDs

Rechargeable Battery Pack System

The SKC Aluminum Cyclone is a lightweight respirable dust sampler that
is used with a filter loaded into a three-piece filter cassette. The cyclone
separates dust particles according to size. The respirable particles collect
on a filter for analysis while larger particles fall into the grit pot and are
discarded

This area sampler is good for up to 30 L/M. This stationary unit is used plugged into an electrical outlet. High-Volume Air Sampling Pumps sample air for asbestos fibers and other particulates. Specifications: Volumetric Air Sampler samples air with the smooth, constant flow of a Rotary Carbon Vane. Oil-less operation with only one moving part requires very little maintenance. Regulator has a locked-in operating range of 3-30 lpm

A versatile air sampling pump with a flow range of 1–5,000 cc/min.

These breathing zone pumps are used with sampling hardware for particulate sampling. The Gilian HFS-513 and 113 is useful for sampling particulate in the breathing zone of workers.

Fast, automatic, clean and field portable, the DryCal DC-1 sets a new standard for accuracy, ease of use and versatility. By using a near-frictionless piston, the DryCal lets you rapidly tune in the equipment under calibration without the use of soap films which sometimes deliver false readings due to poorly formed or burst bubbles.

The Bios DC-1 Dry Cal consists of two primary sections. The base contains the electronics and computer, while the flow cell performs the actual physical measurements. The base has an opening on its upper surface into which the flow cell is installed. The front of the base is angled for easy reading of the LCD display and includes a Power On/Off switch and Charge LED indicator. Below these are push-button switches.

Flow readings are obtained with the push of a button. The DryCal can be set to take flow readings automatically or manually. There are 3 different cells to choose from for different flow rates.