Particulate Monitors

The TSI DustTrak DRX Model 8534 Aerosol Monitor can simultaneously measure both mass and size fraction.

Features & Benefits:
• Simultaneously measure size-segregated mass fraction concentrations corresponding to PM1, PM2.5, PM10, Respirable and Total PM size fractions
• Lightweight and portable
• Manual and programmable data logging functions
• Single point data logging capability
• Handheld Unit
• Aerosol Concentration range 0.001 to 150 mg/m3
*AH

The TSI DustTrak II Aerosol Monitor is a desktop battery-operated, data-logging, light-scattering laser photometer that gives you real-time aerosol mass readings. It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance.

It is suitable for clean office settings as well as harsh industrial workplaces, construction and environmental sites, and other outdoor applications. The TSI DustTrak II Aerosol Monitor measures aerosol contaminants such as dust, smoke, fumes, and mists.

Common applications include:
• Industrial/occupational hygiene surveys
• Indoor air quality investigations
• Outdoor environmental monitoring
• Baseline trending and screening
• Engineering control evaluations
• Remote monitoring
• Process monitoring
• Emissions monitoring
• Aerosol research studies
*AH

The TSI's P-TRAK® Ultrafine Particle Counter is a portable instrument which detects and counts ultrafine or nanoparticles (smaller than 1 micrometer in aerodynamic diameter) that often accompany or signal the presence of a pollutant that is the root cause of complaints. It is now being used to track down some of the most difficult IAQ problems imaginable.

The P-TRAK locates obvious pollutant sources such as boilers, furnaces, vehicles and also detects the not-so-obvious sources such as photocopy machines and printers. Use this instrument to detect the migration of toxic exhaust gases, malfunctioning office equipment, pinhole gasket leaks in boilers and a wide variety of other problems.

Features and Benefits
•Real-time ultrafine particle counter
•Solves tough IAQ problems
•Easy to use
•Data log information

Ergonomically designed and lightweight, the Lighthouse HANDHELD line of particle counters are the most advanced Handheld particle counters on the market.

Offering 6 channels of simultaneous particle counting, the Lighthouse HANDHELD Particle Counters display both cumulative and differential particle count data as well as Temperature/Relative Humidity data on its easy to read 3.8” (9.65 cm) touch screen. A removable battery maximizes the HANDHELD’s uptime. Data is easily downloaded using the Lighthouse Data Transfer Software.

The HANDHELD can be used as a mobile particle monitor or can become a part of a larger facility monitoring/management system.

The portable, HHPC-6 is the ideal particle counter for clean rooms, not continuously controlled, or in areas not completely covered by stationary monitoring systems, where it is important to check the filters and document the status "in operation". Can be operated mobile, as well as stationary by using an AC adapter.
Features:

Channel sizes: 0.3, 0.5, 0.7, 1.0, 2.0 and 5.0

•Hand held particle counter to show all 6 channels, RH and Temp simultaneously

•Internal pump

•On-screen display of Battery life

•Includes Utility Software for easy downloading of 500 sample records

Avoiding employee exposure to potentially harmful liquid or solid particles requires accurate consistent ambient aerosol measurements. TSI's DustTrak Aerosol Monitor provides reliable exposure assessment by measuring particle concentrations.

The DustTrak is a portable, battery-operated laser photometer which gives you a real-time digital readout with the added benefits of a built in datalogger. Suitable for clean office settings as well as harsh industrial workplaces, the DustTrak detects potential problems with airborne contaminants such as dust, smoke, fumes, and mists.

The DustTrak is easy to use, too. You can perform quick spot checks or you can program the advanced logging modes for long-term sampling. You can program the start/stop times, recording intervals and other parameters. You can even set up the instrument for continuous unattended operation.

The TSI Model 8020 PORTACOUNT Plus provides the most effective method of determining the fit of a respirator to an employee. This device measures the particle concentration inside and outside the respirator and calculates a fit factor.

As with any quantitative fit testing technique, the respirator (supplied by user) must be equipped with a high efficiency filter.

•Provides quantitative “PASS or FAIL” results
•FitPlus Software simplifies procedure by letting computer do the work
•Programmable protocols including exercise descriptions and durations
•Tests any type of respirator with a tight-fitting facepiece